BMW

BMW questions? Ask a BMW repair Expert for answers.

Connect one-on-one with {0} who will answer your question

Related BMW Questions
2008 E60 528i - Rough idle, engine light. Replaced Mass Air
2008 E60 528i - Rough idle, engine light. Replaced Mass Air Sensor and Air Filter, still getting codes 2D06 Mass Air, 29E1 Mixture Control 2, 29E0 Mixture Control 1. … read more
Steve
Steve
Master's Degree
25,177 satisfied customers
2008 BMW X3, 3.0i, SES came on while driving and car started
2008 BMW X3, 3.0i, SES came on while driving and car started running rough and bucking. Scanned the car and showed codes 29E0 and 29E1, due to previously being told by BMW the MAF sensor needed to be … read more
Steve
Steve
Master's Degree
25,177 satisfied customers
2010 BMW 528i Xdrive. The vehicle has 148k miles on it. It
2010 BMW 528i Xdrive. The vehicle has 148k miles on it. It idles, and drives fine through all RPM ranges, no issues seen there. It gets mixture control 1 and 2 codes, along with cat conversion 1 and 2… read more
Steve
Steve
Master's Degree
25,177 satisfied customers
I'm working on an 05 BMW X3 was having the trouble code
Hi I'm working on an 05 BMW X3 was having the trouble code p0014 I removed the valve what should I do next… read more
Daniel
Daniel
BMW Diagnostician
Automotive Diagnostician
742 satisfied customers
Code p1188 and p1189. 2000 e39. 528i. Replace maf and the
At start up when cold rough idle and cuts off but when I disconnect vanos on exhaust side it idles fine… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,987 satisfied customers
My 328i 2011 has a very crank when I start it and for a few
Hi. My 328i 2011 has a very long crank when I start it and for a few seconds after it turns on, shows hesitation. It's throwing the following error codes: 2A94/not present >> DME: Crankshaft sen… read more
Steve
Steve
Master's Degree
25,177 satisfied customers
I have a 29e0 and 29e1 mixture control codes. I did try to
I have a 29e0 and 29e1 mixture control codes and when they were checked it was showing miles when that happens with 12 000 rmp recorded ?… read more
Marty
Marty
ASE Certified Technician
Associate Degree
643 satisfied customers
I have a 2011 BMW 328i xdrive with an N51 engine and about
I have a 2011 BMW 328i xdrive with an N51 engine and about 78,000 miles on it. Recently, I have had a low RPM rattle that I attributed to a bearing growl on a worn and slightly misaligned belt tension… read more
Kenny
Kenny
Vocational, Technical or Trade Scho
1,120 satisfied customers
I replace the valve cover gaske on a 2008 bmw X5 and now has
I replace the valve cover gaske on a 2008 bmw X5 and now has many codes and it runs like crape codes 29E0 E BOX FAN,29E0 MIXTURE CONTROL ,29E1 MIXTURE CONTROL 2 ,2D06 AIR MASS SYSTEM ,2E98 GENERATOR C… read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
7,603 satisfied customers
2008 BMW X5 3.0 WAS DOING VALVE COVER GASKET AND WHEN I
2008 BMW X5 3.0 WAS DOING VALVE COVER GASKET AND WHEN I removing the servo motor it spring back did not know the procedure to remove it I do not see that it will be a program to reinstall or do I need… read more
Steve
Steve
Master's Degree
25,177 satisfied customers
I have a 29e0 and 29e1 mixture control codes on my x3. The
I have a 29e0 and 29e1 mixture control codes on my x3. The motor surges and hesitates. What's the best place to start for the fix here..thanks… read more
Lou Palomino
Lou Palomino
associates in automotive technology
8,381 satisfied customers
2007: Codes 2a94 crankshaft sensor signal 2f71 electronics-box
Codes 2a94 crankshaft sensor signal 2f71 electronics-box fan activation 29e1 mixture control 2 29e0 mixture control 581e signal error engine speed from engine management 5e1a engine management interfa… read more
Roger
Roger
BMW Master Tech
Bmw STEP Training
3,071 satisfied customers
528i: Hey whats up, I have an 08 528i thats idling rough.
Hey what's up, I have an 08 528i that's idling rough. Its setting a check engine light and throwing a few codes 2D06 air-mass system, 29E1 mixture control 2, & 29E0 mixture control. What do you think?… read more
Steve
Steve
Master's Degree
25,177 satisfied customers
98 528i: specs..cam timeing change when vanos is energized with 12v.
Hi, We have a 98 528i single vanos setting code 212 vanos mechaniclay jammed. Are specs availabe for the amount of cam timeing change when vanos is energized with 12v. Car runns fine but code returns.… read more
Phil_Harrison
Phil_Harrison
Technician
304 satisfied customers
BMW 528i 1998 BMW 528i with consistent P0340 (Campshaft Position
1998 BMW 528i with consistent P0340 (Campshaft Position Sensor A Banck Circuit Malfunction) CEL. I recently replaced the head and have now retimed the Cams 3 times. Also has pending codes of P1519 (Va… read more
GEORGEBMW1
GEORGEBMW1
Auto Repair Shop Owner
Virgina Automotive Technical Instit
61 satisfied customers
How Do I Change The Camshaft Position Sensor In B.M.W 528i
How Do I Change The Camshaft Position Sensor In B.M.W 528i? The code is P0340 (Sensor A Circuit; Bank 1 or single sensor) In addition, I have code P0130 the O2 circuit (Bank 1, Sensor 1)… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
M3: there is a noticeable hissing sound coming..vanos..3.0L
Hi my question is every time the car is switched off when the engine is hot there is a noticeable hissing sound coming from the front near the VANOS cover. The engine is a 3.0L M3 95 model with about … read more
bimmaster
bimmaster
BMW Technician
Vocational, Technical or Trade Scho
1,880 satisfied customers
2001 X5: error codes..code reader..Mixture Control, off idle, Cyl #1-4
My 2001 X5 (E53) 4.4i (M62) is displaying 7 error codes using my Peake code reader, they are the following: 1. Mixture Control, off idle, Cyl #1-4 2. Mixture control, off idle, Cyl #5-8 3. Mixture Con… read more
ttiger79
ttiger79
Auto Mechanic
High School or GED
880 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Roger

Roger

BMW Master Tech

3,071 satisfied customers

10 yrs. experience as BMW Master Technician, shop foreman and dealer.

Marty

Marty

ASE Certified Technician

643 satisfied customers

ASE & Bosch Certified Master Tech. Over 30 years experience.

bimmaster

bimmaster

BMW Technician

1,880 satisfied customers

3 years dealer experience, master bmw tech

Sam

Sam

BMW Master technician

1,043 satisfied customers

BMW S.T.E.P. graduate, 10 years BMW dealership experience

Thebmwbum

Thebmwbum

BMW Foreman

714 satisfied customers

31 years BMW Experience

mike

mike

BMW Technician

694 satisfied customers

bmw master tech ase certified

Matt

Matt

Engineer

24,821 satisfied customers

Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x