How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted G. Your Own Question
Ted G.
Ted G., ASE Certified Technician
Category: BMW
Satisfied Customers: 6139
Experience:  20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness
Type Your BMW Question Here...
Ted G. is online now
A new question is answered every 9 seconds

X5: replaced two feed lines to rear brakes and now no pressure

Customer Question

replaced two feed lines to rear brakes and now no pressure to rear. i have snap on verus but cant activate abs with it
Submitted: 2 years ago.
Category: BMW
Expert:  Ted G. replied 2 years ago.
You are going to need a scanner that can activate the bleed procedure for the ABS, I'm sure there is air trapped in there. In some cases you may also need a pressure bleeder because it can be very difficult to get that system bled down.