How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190
peterpete190, Auto Technician
Category: BMW
Satisfied Customers: 27862
Experience:  Over 17 years diagnosing and repairing vehicles.
14928985
Type Your BMW Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

I have a 03 330i that intermmitanly shows turbine speed at

Customer Question

I have a 03 330i that intermmitanly shows turbine speed at 2-900 rpm with output speed 0. Have replace input speed senso, output speed sensor, wiring harness, rebuilt torque converter, replace neutral safety switch, flushed trans fluid put correct atf. transmission works perfect until it sees different value from input speed to out put speed. I'm Lost.
Submitted: 2 years ago.
Category: BMW
Expert:  peterpete190 replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
Inspect the wiring at and leading to the transmission to see if any wiring issues are found.If a wiring or connection fault is found it will need to be repaired to correct this here.If this is all found to be o.k. this may be a fault with the computer itself internally displaying and seeing an incorrect signal.
Thanks Pete