How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dino Your Own Question
Dino
Dino, service engineer
Category: Australia Whitegoods
Satisfied Customers: 45
Experience:  service technican at elite appliance care
99390383
Type Your Australia Whitegoods Question Here...
Dino is online now
A new question is answered every 9 seconds

Trying to replace an element for Simpson Evolution 807 oven,

Customer Question

trying to replace an element for Simpson Evolution 807 oven
JA: What's the make and model of your oven? And can you guesstimate how old it is?
Customer: Simpson,Evolution 807 maybe 15-20 yrs old
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no i have replaced an element on our oven at home that had screws at the back but this oven seems not to have them
Submitted: 2 months ago.
Category: Australia Whitegoods
Expert:  Dino replied 2 months ago.

Hi

The elements are normal held on by screws at the back of the oven.

So you need to pull the oven out and remove the back panel. But first turn the power off to the appliance.

Then from there you will see the wiring going to the element.

Either side if the wires you will see either a screw or a bolt.

Remove these and then you can remove the element from inside the oven.

Then just fit the new one in reverse order.

Regards