How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 22859
Experience:  Highly accurate diagnostician with over 30 years of experience.
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

Dryer beeps 6 times and drying led flashes. Machine does not

Customer Question

Dryer beeps 6 times and drying led flashes. Machine does not run at all.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just today.
JA: Do you plan on doing the work yourself?
Customer: I can.
JA: Anything else we should know to help you best?
Customer: No
Submitted: 10 months ago.
Category: Australia Whitegoods
Expert:  Kelly replied 10 months ago.

Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you!

Expert:  Kelly replied 10 months ago.

The beeping and flashing is an error code. Unplug the machine for at least 4 hours to allow a full reset. If the behavior does not change, please post the model number and I can look up the error code you are seeing.

Customer: replied 10 months ago.
Westinghouse LD605E 6kg sensor dry.
Tried the reset as you proposed and I have the same error code.
Expert:  Kelly replied 10 months ago.

Press and hold the PROGRAM & TEMPERATURE buttons for 3 seconds. Any change?

Customer: replied 10 months ago.
No change when pressing temperature and program for 3sec.
Expert:  Kelly replied 10 months ago.

It sounds like you may have an issue with the main controller. However, I cannot locate the service information for that exact model series and don't want to recommend replacing an expensive part without knowing with 100% certainty. I am going to see if another may have any other input.