How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Webb-Guy Your Own Question
Webb-Guy
Webb-Guy, Home Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 2100
Experience:  maitenance tech at casto
95800582
Type Your Australia Whitegoods Question Here...
Webb-Guy is online now
A new question is answered every 9 seconds

Have just fitted a new control board to my Simpson SWT704

Customer Question

Hi Pearl, have just fitted a new control board to my Simpson SWT704 but can only get cold water fill on both hot & cold selection. No power from control board to solenoid. Previously machine just stopped mid cycle which required replacement control board. Any thoughts (other than new control board faulty). Tony
JA: How long has this been going on? And how severe is the problem?
Customer: Since fitting control board 2 hours ago.
JA: Do you plan on doing the work yourself?
Customer: Yes. Did my apprenticeship at Simpson Pope and have worked at Westinghouse and Malleys.
JA: Anything else we should know to help you best?
Customer: No, just cold water fill only on all temperature selections
Submitted: 11 months ago.
Category: Australia Whitegoods
Expert:  Webb-Guy replied 11 months ago.

Hello and welcome to just answer my name is ***** ***** I will be the one to assist you. Have you inspected the water inlet valve.

Customer: replied 11 months ago.
Expert:  Webb-Guy replied 11 months ago.

Well if the valve is not the problem then that leaves the board being faulty you replaced it with.