How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AUSSIE- Repair Tech. Your Own Question
AUSSIE- Repair Tech.
AUSSIE- Repair Tech., Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 3620
Experience:  Appliance Tech with 12 years experience in the Industry.
Type Your Australia Whitegoods Question Here...
AUSSIE- Repair Tech. is online now
A new question is answered every 9 seconds

My dish draw was repaired yesterday with the prism for the

Customer Question

my dish draw was repaired yesterday with the prism for the draw being closed replaced it does still not start the cleaning cycle due to the draw not being closed alarm I would like to check the prism for alignment how do I take the draw out so I can check the prism please.
JA: Have you tried power cycling the appliance -- unplugging it and leaving it off for a few hours?
Customer: yes all night
JA: Do you plan on doing the work yourself?
Customer: I am an registered electrician so I am able to do this task
JA: Anything else we should know to help you best?
Customer: how do I remove tne draw
Submitted: 11 months ago.
Category: Australia Whitegoods
Expert:  Webb-Guy replied 11 months ago.

Welcome to just answer my name is ***** ***** I will be the one who will try to assist you today. What is the model number to your appliance you are seeing to have trouble with.