How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 22907
Experience:  Highly accurate diagnostician with over 30 years of experience.
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

Installed my new Panasonic Air conditioner on the weekend

Customer Question

Installed my new Panasonic Air conditioner on the weekend Model#CS-Z24RKR Indoor unit
CU-Z24RKR Outdoor unit. When I went to use it the timer indicator was blinking turned the unit of at the isolation switch then back on then it started but will only run for 15mins
retrieved the error code H00.
Submitted: 1 year ago.
Category: Australia Whitegoods
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The H00 means that there is no abnormality in the system detected. I am not sure why it would shut off and display that. Are you trying to set a programmed run time or just turning the unit on in a manual mode?

Customer: replied 1 year ago.
The problem is when I try and turn it on using the remote nothing happens with the timer indicator blinking. I'm not trying to set
a programmed run time or anything.
Expert:  Kelly replied 1 year ago.

Will it run if set manually from the unit and not through the remote?

Customer: replied 1 year ago.
NO is there anyway I can reset the remote to cancel the timer indicator blinking