How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 22554
Experience:  Highly accurate diagnostician with over 30 years of experience.
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a westinghouse dishwasher WDF902 and it won't go

Customer Question

Hi - I have a westinghouse dishwasher WDF902 and it won't go through a proper cycle. It goes for a few minutes then stops and the display flashes with a small dash (vertical) and 10..?? Any ideas? I've tried resting it, turning it off and on at the power - still can't find a solution
Submitted: 1 year ago.
Category: Australia Whitegoods
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! That means there is an issue with the filling of the machine.

• The water tap is blocked or restricted with limescale. Clean the water tap.

• The water tap is closed. Open the water tap.

• The filter in the water inlet hose is blocked. Clean the filter.

• The installation of the water inlet hose is not correct. The hose can be kinked or squashed. Make sure that the installation is correct

Customer: replied 1 year ago.
Thank you - I will try these solutions and let you know how I go - many thanks
Expert:  Kelly replied 1 year ago.

Sounds good, thank you.