How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis Your Own Question
Curtis, Australia Car Mechanic
Category: Australia Car
Satisfied Customers: 1609
Experience:  Qualified Automotive Mechanic, LPG & Airconditioning Diagnostic Technician.
Type Your Australia Car Question Here...
Curtis is online now
A new question is answered every 9 seconds

Best way to remove the engine from a 2003 Range Rover HSE

Customer Question

Best way to remove the engine from a 2003 Range Rover HSE 4.4 V8.
JA: How many miles are on the car? Is it an automatic or a manual transmission?
Customer: its done over 333000
JA: Are you fixing your Range Rover yourself? What have you tried so far?
Customer: once out I will take it to a mechanic for the strip down
JA: Anything else you want the mechanic to know before I connect you?
Customer: head gaskets leak and possible rear main. has had the gearbox done. goes well maybe a bit down on power and up on fuel use.
Submitted: 3 months ago.
Category: Australia Car
Expert:  Gunvir Singh replied 2 months ago.

Hello, lety me review your request. Please stand by.

Expert:  Gunvir Singh replied 2 months ago.

Are you just looking for the engine removal procedure?

Customer: replied 2 months ago.
The engine needs the heads done and possible rear main seal. So nt sure which is easier to do? Lift th motor outor take it out complete on the sub frame? Just engine or with the gearbox attached? Is it best to remove the front nose cone, radiator and support or will it come out under/over it all?
how many ancillaries have to be removed, or can some of these just be pushed aside?
Expert:  Gunvir Singh replied 2 months ago.

I have always found it easier to remove the engine assembly and then remove the heads. I have attached the procedure to remove the engine.

Expert:  Gunvir Singh replied 2 months ago.

Do you have any other questions?