How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Australia Car
Satisfied Customers: 32066
Experience:  Automotive Repair Shop Manager, Technician/JA Mentor
3195632
Type Your Australia Car Question Here...
Eric is online now
A new question is answered every 9 seconds

I have a Dec1991 build TF Rodeo with a 2.6 MPI 4ZE1 petrol

Customer Question

I have a Dec1991 build TF Rodeo with a 2.6 MPI 4ZE1 petrol engine I need a diagram for the vacuum hose routing, or some pics of the hoses in place as some hoses were misplaced/lost. The diagrams from internet are left hand drive and have different fittings and routing. Engine cranks but wont start. Can anyone please help?
Rodney
Submitted: 7 months ago.
Category: Australia Car
Expert:  Eric replied 7 months ago.

HI,

Ok, I need the last 8 of the vin to pull those schematics

Unless the vacuum hoses are horribly misrouted, it should start.

Have you tested the fuel pressure and if so, what is it when cranking and with key in on position?

Customer: replied 7 months ago.
fuel pressure 40-45 psi. VIN JAATFR17HN7102123. ENG is 4ZE1-A. Vacuum hoses could be anywhere, thats why i need a schematic to suit this vehicle or pics of the hose in situ. All assistance would be appreciated. Can call me on 0402 277 607 if you like? Cheers, Rodney
Expert:  Eric replied 7 months ago.

HI,

I am in the USA, so a phone call would be a bit expensive. Give me a minute to check for the vacuum diagram

Customer: replied 7 months ago.
As you know I am in Australia. The vehicle is Australian delivery.
Expert:  Eric replied 7 months ago.

Hi,

Ok, by the last 8 of the vin, this is what pulls up - see attached

Customer: replied 7 months ago.
Hi Eric, the diagram seems ok but the Fast idle solenoid has 2 large hoses and 2 small hoses attached. Not on this diagram, it has only the large hoses, where do the 2 small hoses go??
cheers Rodney
Expert:  Eric replied 7 months ago.

HI,

Ok, checking further doesnt show the additional hoses, so I am not sure where the 2 additional hoses go. I will open this up to other experts to see if anyone else has more information to help you

Customer: replied 7 months ago.
Thanks for your help? I will wait patiently for any more info.Rodney

Related Australia Car Questions