How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pedro Goncalves Your Own Question
Pedro Goncalves
Pedro Goncalves,
Category: Australia Car
Satisfied Customers: 13
Experience:  Licensed Master/Hybrid Technician at Mendes Motors
95810034
Type Your Australia Car Question Here...
Pedro Goncalves is online now
A new question is answered every 9 seconds

How do we disable traction control, to be able to do a full

Customer Question

How do we disable traction control, to be able to do a full dyno test on a can am spyder?
Submitted: 10 months ago.
Category: Australia Car
Expert:  Pedro Goncalves replied 10 months ago.
Does it have VSC button on the vehicle? Have you tried holding it down for 10 seconds?
Expert:  Pedro Goncalves replied 10 months ago.
Is there any fuse that you can remove temporarily in order to perform the test? Have you considered disconnecting the speed sensors. Lights will go on. But should turn off afterwards. I did some researching and came with nothing. I do believe that those are your best options.