How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Peter Bagley Your Own Question
Peter Bagley
Peter Bagley, Toyota mastertech
Category: Australia Car
Satisfied Customers: 771
Experience:  master tech at Toyota dealer
Type Your Australia Car Question Here...
Peter Bagley is online now
A new question is answered every 9 seconds

Looking for fuses and relays for fuelpump on 91 corona as

Customer Question

looking for fuses and relays for fuelpump on 91 corona as gas not getting into cylinders,cant find power at pump
JA: How many miles are on the car? How old is the battery?
Customer: hello? is this thing on?
JA: What is the model of your '91 Toyota?
Customer: corona,i think is same as camry
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: tried changing filter,and we have petrol at the injectors but their not letting petrol in
JA: Anything else you think the mechanic should know?
Customer: im looking for the position of the fuel pump fuse/relay thanks
Submitted: 1 year ago.
Category: Australia Car
Expert:  Peter Bagley replied 1 year ago.

Hello and welcome to just answer and allowing me to assist you. I will give you pics of your relay and fuel pump test connector terminals that you can use to bypass the system by using a jump wire to check your pump operation . the exact location may vary do to other countries.. usually the are in the engine compartment left or right side, the relays should be in the fuse relay block and marked on the cover which one the are. some times called fuel open circuit relay. he first pic is the relay, second and third is a pic of what you test connector may look like it will be one or the other depending on your model. hope this helps your question. If you require further assistance I'll be happy to do so