How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, Australia Car Mechanic
Category: Australia Car
Satisfied Customers: 1010
Experience:  Senior Technician
Type Your Australia Car Question Here...
Gary is online now
A new question is answered every 9 seconds

How to reset airbag light staying on in 2010 holden

Customer Question

how to reset airbag light staying on in 2010 holden commodore ve?
Submitted: 11 months ago.
Category: Australia Car
Expert:  Gary replied 11 months ago.

Hello there,

Have you repaired what was wrong with the car?

You need a TECH 2 or a GOOD generic scan tool to erase any history code.

You cannot erase CURRENT codes that have been repaired.


Customer: replied 11 months ago.
No repairs. Just airbag light staying on continuosly beeping. Is there any way that I can either reset the problem or disable it?
Expert:  Gary replied 11 months ago.

You could pull the SRS fuse, fuse No. 1 in the LH kickpanel.

More than likely the instrument cluster will still have a warning, from no communication with the SRS module.

Your best bet is to have it fixed by Holden.

At the moment, while there is a fault, NO AIRBAGS are deployed in an accident.

Hope this helps.


Expert:  Gary replied 11 months ago.

Hi again,

I hope my advice has been of assistance to you.

Kind regards


Related Australia Car Questions