How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Technician
Category: Australia Car
Satisfied Customers: 28763
Experience:  Over 17 years diagnosing and repairing various model vehicles with some certifications and training.
Type Your Australia Car Question Here...
Pete is online now
A new question is answered every 9 seconds

Can i fit ford 2.5 lte to my dt 50 to replace the 3 lte

Customer Question

can i fit ford 2.5 lte to my dt 50 to replace the 3 lte motormy mazda 2008 the ford motor is a 2010
JA: How many miles are on the car? Is it an automatic or a manual transmission?
Customer: my has 160000 the ford motor has 30000kall manual
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: nothing yet as my dt 50 brok timeing belt
JA: Anything else you think the mechanic should know?
Customer: the ford ute i can get complt car
Submitted: 1 year ago.
Category: Australia Car
Expert:  Pete replied 1 year ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.My info is somewhat limited on your model here but I had seen no one else has responded and would like to see if I can help here.If at any time you feel that I cannot help with this please let me know.

I see no one has posted any help with this here.In some cases this can be due to the info you may be looking for may be difficult to obtain or the correct person that can help may not be online.

This is tough to say for sure from here if this will fit and work in your model.I have seen where similar instances can be done but the engine wiring usually needs changed out as well as the computer,engine mounts,sometimes the transmission and radiator.If possible it is best to have a repair facility that does modifications inspect this for you to see if this can be done.They can usually tell by looking at it and compare it to what you want to do on it to see if it is possible in any way.

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.

Thanks Pete