How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Australia Car
Satisfied Customers: 35530
Experience:  ASE Certified Tech
7276279
Type Your Australia Car Question Here...
Ron is online now
A new question is answered every 9 seconds

Have a Bedford au made 214 cu motor in a 3 ton truck 1971

Customer Question

Have a Bedford au made 214 cu motor in a 3 ton truck 1971 model. distrributor rotation is clockwise. manual says should be anti-clock
Submitted: 1 year ago.
Category: Australia Car
Expert:  Ron replied 1 year ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

My information on your model is very limited but since no one else has stepped in try and help you I will see if I can. If you are sure you have spark to all cylinders and its still running rough then you should consider running a compression test on all cylinder to make sure they all have good compression. If they check okay then you may also want make sure there are no engine vacuum leaks. Post back with the results and we can work from there.

Related Australia Car Questions