How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask indy-tech Your Own Question
indy-tech, Australia Car Mechanic
Category: Australia Car
Satisfied Customers: 7111
Experience:  All import and domestic car repairs and diagnostics
Type Your Australia Car Question Here...
indy-tech is online now
A new question is answered every 9 seconds

I am trying to replace the front output oil seal in the

Customer Question

hi i am trying to replace the front output oil seal in the transfer case.. do i need to pull out the transfer case?
Submitted: 2 years ago.
Category: Australia Car
Customer: replied 2 years ago.
2006 105 landrcruiser
Expert:  indy-tech replied 2 years ago.
Hi .
No need to remove the T/C, just remove the drive shaft then the yoke pull out the seal and replace with the new one .
replace the yoke flange and torque down the bolt to 127Nm
Need further assistance with this issue then please get back to me with the reply button and not the poor or bad service rate buttons .
This way i can get back to you and suggest other options or suggest another Expert .
Kindest regards Greg