How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Technician
Category: Australia Car
Satisfied Customers: 27884
Experience:  Over 17 years diagnosing and repairing various model vehicles with some certifications and training.
Type Your Australia Car Question Here...
Pete is online now
A new question is answered every 9 seconds

Navara: I've got a navara 2008 d40 yd2.5 just put new cylinder

Customer Question

Hi I've got a navara 2008 d40 yd2.5 just put new cylinder head on doubled checked valve timing but won't start haven't got any injector pulse. Checked wiring and cam and crank sensor
Submitted: 2 years ago.
Category: Australia Car
Expert:  Pete replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
If you haven't inspected to see if all fuses are good in all fuse panels this needs done.If a fuse issue is found it will need to be replaced to correct this here.If all fuses are o.k. and you know for sure the timing and timing components are all o.k. including the engine wiring harness and cam and crank sensors this can be the engine computer itself at fault needing replaced.I have seen the computer fail in the past before and had to replace it for issues like this here.
Thanks Pete
Expert:  Pete replied 2 years ago.

I am following up with you to see if you still needed help with your question you had asked.If my help didn't satisfy your question please let me know so we can continue.

Thanks Pete

Related Australia Car Questions