How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AudiDoc Your Own Question
AudiDoc
AudiDoc, Independent Audi Shop Owner
Category: Audi
Satisfied Customers: 1695
Experience:  I've been working on Audis since I was 18 and own an independent Audi repair and performance shop
14582033
Type Your Audi Question Here...
AudiDoc is online now
A new question is answered every 9 seconds

I have 99 audi a4 1.8T AEB. I removed my cams, some time

Customer Question

I have 99 audi a4 1.8T AEB. I removed my cams, some time passed my alignment marks, on the rear chain, are gone. When the key holes in cams align with marks on the bearing cap #6 the time markings on the front sprocket is not aligning. I can't figure out why it's not aligning
Submitted: 1 year ago.
Category: Audi
Expert:  Wolfgang replied 1 year ago.

Hi can you send a pic of this to see if you are referencing the correct marks. Thanks