Audi

Audi repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Audi Questions
I just changed waterpump on my 2002 audi a4 3.0. And when I
I just changed waterpump on my 2002 audi a4 3.0 . And when I pulled the timing belt off I lost my mark on the left cam and it rotated and I am not sure what mark it was. SO I borrowed my buddy's cam l… read more
supermechanic
supermechanic
Service consultant
Vocational, Technical or Trade Scho
10 satisfied customers
No compression on 4,5,6 after replacing cam chain tensioner
No compression on 4,5,6 after replacing cam chain tensioner the cylinders are holding air pressure on 4,5,6 even when cam is in position to have valves open … read more
BOBBYSS
BOBBYSS
TECHNICIAN/ADVISOR
Associate Degree
8,343 satisfied customers
Should the ext cam gear be free or have resistance ?? The
should the ext cam gear be free or have resistance ?? … read more
Wolfgang
Wolfgang
14 satisfied customers
Started working on my Audi timing issue... replacing the
started working on my Audi timing issue... replacing the timing tensioners and found the following on the passenger bank; - Intake gear was loose which caused.. - all rocker arms on Exhaust cam are of… read more
supermechanic
supermechanic
Service consultant
Vocational, Technical or Trade Scho
10 satisfied customers
I have a 2006 Audi A4 Quattro with a 2.0 engine dual cam. The
I have a 2006 Audi A4 Quattro with a 2.0 engine dual cam. The camshaft timing chain broke and did not damage engine I am replacing the intake camshaft chain etc and need to know how to install the cam… read more
Wolfgang
Wolfgang
14 satisfied customers
Audi: Have a 2000 Audi tt, had the head redone and my mech.
Have a 2000 Audi tt, had the head redone and my mech. didn't line up cam marks, i think the cam on the intake side is off a tooth, can i adjust this without loosing the TDC on everything else… read more
Wolfgang
Wolfgang
14 satisfied customers
Audi A4 Quattro: my son's 2005 audi a4 quattro had a serious
my son's 2005 audi a4 quattro had a serious vacuum problem from a timing gasket in the back of the engine cam assembly. To replace it we had to remove the cam shafts and timing chain. Now we need to r… read more
gomi_otaku
gomi_otaku
Auto Technician (dealership)
Vocational, Technical or Trade Scho
2,229 satisfied customers
Audi A6: Jake I am currently working on an Audi A6 2005 with
Jake I am currently working on an Audi A6 2005 with a 3.2. I am in the process of setting cam timing on r/h side post chain and tensioner. I purchased the cam locking tools but am confused about how t… read more
Chris (aka - Moose)
Chris (aka - Moose)
Technician
Vocational, Technical or Trade School
369 satisfied customers
Audi A6 quatro: I have a 2000 audi A6, 2.8L and I am in the
I have a 2000 audi A6, 2.8L and I am in the process of changing the timing belt. The belt was damaged so when I removed it the timing was off and had to start from scratch. Inadvertently I removed the… read more
AudiDoc
AudiDoc
Independent Audi Shop Owner
Bachelor's Degree
1,709 satisfied customers
Audi A4 Quattro: hows it goin man i just did a tb job and replaced
hows it goin man i just did a tb job and replaced the cam gaskets all of them now im getting code p0346?… read more
AutoGuy99
AutoGuy99
Automotive Technician
Vocational, Technical or Trade Scho
85 satisfied customers
Audi A6 Quattro: 2000 Audi A6- 2.8 30 V.Engine code P0346
2000 Audi A6- 2.8 30 V. Engine code P0346 with misfire on 456. Car had P0346 code when I bought it. Changed TB, water pump, rolller, tensioner and hydraulic dampener. Used cam bar and crank locking pi… read more
AudiDoc
AudiDoc
Independent Audi Shop Owner
Bachelor's Degree
1,709 satisfied customers
2000 audi a4: manual transmission..the intake and exhaust cams..valves
I have a 2000 audi a4 1.8t with a manual transmission. I need to know if the the intake and exhaust cams have timing marks as the entire head minus the valves is in pieces and nothing was marked prior… read more
Jake
Jake
Audi Technician
Vocational, Technical or Trade Scho
2,110 satisfied customers
2003 A6: tdc on re-installation of cams..exhaust valve springs
I am having difficulty maintaining TDC on re-installation of cams on a 2003 A6 2.7t I suspect the difficulty has to do with compressing exhaust valve springs. Any advice?… read more
AudiDoc
AudiDoc
Independent Audi Shop Owner
Bachelor's Degree
1,709 satisfied customers
2002 a6: 3.0 that I am replacing the timing belt..intake valves..tdc
I have an 2002 a6 3.0 that I am replacing the timing belt on.I have the cam lock tool on and wanted to check if the cam lock can only go one way .both of the intake valves are pointing up at TDC ....w… read more
AudiDoc
AudiDoc
Independent Audi Shop Owner
Bachelor's Degree
1,709 satisfied customers
Audi A6 Quattro I just did compression test on 99 Audi A6
I just did compression test on 99 Audi A6 AWD. It shows that there is 0 compression on cylinder number 2. Test was done on cold engine - car doesnt really run good so I had no choice. All other cylind… read more
Marty
Marty
Vice President / Manager
Associate Degree
22,708 satisfied customers
Audi a4: No boost leaks, maf is..pcm..camshaft..o2 sensor
Loss of power on audi a4. No boost leaks, maf is fine, replaced precat o2. pcm throws a camshaft postiotion sensor range/performance and a o2 sensor b heater circuit. Replaced cps, coils, and o2 senso… read more
jeffrey590
jeffrey590
Automotive Diagnostic Specialist
Vocational, Technical or Trade Scho
7 satisfied customers
1991 audi 200: tdc moved crank..driven with a chain..lifters
where do i allign the marks on the intake and exhaust camshafts on a 1991 audi 200 with the 3B motor? removed the cams but were not at TDC moved crank to TDC but not sure how the intake and exhaust ca… read more
Robert
Robert
Mechanic/Roadside assist/Garage Owner
Vocational, Technical or Trade Scho
1,713 satisfied customers
97 A8: timeing..the marks on the cam gears as a guide
On a 97 A8 4.2 ABZ engine can I set the cam timeing with out the fixtures by making sure the cam gears are in the correction positin useing the marks on the cam gears as a guide?… read more
Jake
Jake
Audi Technician
Vocational, Technical or Trade Scho
2,110 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

AudiDoc

AudiDoc

Independent Audi Shop Owner

1,709 satisfied customers

I've been working on Audis since I was 18 and own an independent Audi repair and performance shop

Matt

Matt

Engineer

586 satisfied customers

Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing

Chris (aka - Moose)

Chris (aka - Moose)

Technician

369 satisfied customers

16 years of experience

Mike Kelly

Mike Kelly

Audi Mechanic

264 satisfied customers

17 years experience as a auto mechanic, foreign and domestic.5 years running my own repair business.

Tim Mohr

Tim Mohr

ASE MASTER TECH

250 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Michael Miller

Michael Miller

ASE Certified Technician

241 satisfied customers

ASE Master Technician. Audi certified, including R8 and TDI (clean diesel).

Quattro King

Quattro King

Technician

140 satisfied customers

ASE Master Certified, 20+ yrs European experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x