How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9945
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

I replace the inverter box, compressor ,and control board,

Customer Question

I replace the inverter box , compressor ,and control board
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: my kscs25inss01 kicthen aid
JA: Can you guesstimate how old your KitchenAid is? And just to clarify, what's the exact model?
Customer: kscs25inss01 10 yr
JA: Do you plan on doing the work yourself?
Customer: have done the work
JA: Anything else we should know to help you best?
Customer: no
Submitted: 1 month ago.
Category: Appliance
Expert:  Tyler Z. replied 1 month ago.

Hello. My name is ***** ***** I'll be helping you with your appliance question today. Please wait a few moments while I review your question.

Expert:  Tyler Z. replied 1 month ago.

What is the actual problem with your refrigerator? I just see what you have replaced.

Customer: replied 1 month ago.
Not running at all nothing. Power to the inverter but no power to the compressor . The compressor would try to start only for 3 seconds then it would shut off. We replaced the board the inverter and the compressor
Expert:  Tyler Z. replied 1 month ago.

There is nothing left if it shuts down. If the unit starts for 3 seconds and shuts down, either the inverter is bad or the compressor is bad.

Customer: replied 1 month ago.
We replaced both twice
Expert:  Tyler Z. replied 1 month ago.

Then either you have really bad luck or you're getting the wrong part. There is nothing left.

Customer: replied 1 month ago.
Can we bypass the power from the control board to got straight to the inverter
Expert:  Tyler Z. replied 1 month ago.

I'm sorry I don't believe I'll be able to assist you here, so I'll opt out, but that will open this question to all other Experts, and someone will be along shortly to assist you

Expert:  Whrlp Master Tech replied 1 month ago.

I see the last person has opted out of your question!
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 37 Years, I own my own Appliance repair Company
And I teach appliance repair at a local Community College.
I have over 100,000 plus in home repairs and over 80,000 internet repairs under my belt.
You will be paying me for my ANSWER to your Appliance Question,, Not for the repair of your appliance hence the name of this site Just Answer.
I will do my best to take the information that you provide to me and make a Diagnosis for you to be able to repair your own Appliance.

this model has 5 electronic control boards what it the part number that you have replaced?

And where are you testing for voltage to the inverter?

Expert:  Whrlp Master Tech replied 1 month ago.

I see you have NOT replied back to me .
Do you still need assistance on your question?