How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81183
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I just ran another load. Did not complete cycle. Pulled

Customer Question

I just ran another load. Did not complete cycle. Pulled error codes again.
F7. E1
First time for the first two codes.
Submitted: 8 months ago.
Category: Appliance
Expert:  Tyler Z. replied 8 months ago.

Hello. My name is ***** ***** I'll be helping you with your appliance question today. Please wait a few moments while I review your question.

Expert:  Tyler Z. replied 8 months ago.

F0 E2 means a button was held for too long so that is likely due to trying to pull up error codes. F7 E1 however is a faulty actuator which is mounted below the tub and the actuator would need to be replaced so below is a link to the part.

CLICK HERE for actuator