Need Appliance Repair Help? Ask a Technician for Answers ASAP
Hello, I'm Joel and will be glad to help you today.
Have you tried to change the water temperature settings to see if maybe one side of the water inlet valve is bad? If you have it cold, try putting it too hot and see if any water comes in if so the water valve is bad, if the valve does not let water in on any setting then the washer load sensing switch needs replaced. The parts are listed below:
Washer Load-Sensing Switch
Part #: WPW10292584 - click here
Washer Water Inlet Valve
Part #: WPW10175893 - click here
I kindly ask at this time that you go ahead and click on the 5th star of the star rating system at the top of your page. Afterwards If you have any follow up questions they will be free and I will continue to help until you are completely satisfied. It's very much appreciated, Thank You!