How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14604
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

GM, Only today, kenmore Electric oven, 2010, IT shuts off in

Customer Question

JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Only today
JA: Do you plan on doing the work yourself?
Customer: kenmore Electric oven
JA: Can you guesstimate how old your Kenmore is? And just to clarify, what's the exact model?
Customer: 2010
JA: Anything else we should know to help you best?
Customer: IT shuts off in 30 seconds after BAKE or BROIL are pushed & temp is set
Submitted: 8 months ago.
Category: Appliance
Expert:  Appliance Guru replied 8 months ago.

One moment while I get some information for you!

Expert:  Appliance Guru replied 8 months ago.

Hello and thanks for using this service! If you are a JA Member I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know your skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our JA members.

Do you have the complete model number?

Customer: replied 8 months ago.
Customer: replied 8 months ago.
I am HARRY,a Factory Trained Smart-Home low voltage Tech 7YRS exp FYI
Customer: replied 8 months ago.
I figure it is either (1) CONTROL PANEL or (2) RELAY/RELAY PANEL..........any thoughts???
Customer: replied 8 months ago.
Looks like you're not available to help this morning, after responding immediately when I contacted Just Answer 30 Mins ago
Expert:  Appliance Guru replied 8 months ago.

That is a main control panel failure, replace the main control board in the unit and it all should work fine again.

All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am credited through the site, tips are appreciated.