How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AppTech8579 Your Own Question
AppTech8579, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1717
Experience:  worked on appliances for around 15 years
Type Your Appliance Question Here...
AppTech8579 is online now
A new question is answered every 9 seconds

I put a new motor on my washer and I still get a E3 code

Customer Question

I put a new motor on my washer and I still get a E3 code THANK YOU AL CHAMP
Submitted: 12 months ago.
Category: Appliance
Expert:  AppTech8579 replied 12 months ago.

Please post complete model number.

Customer: replied 11 months ago.
NFW7200tw 1-743505pg Thank You Al Champ
Expert:  AppTech8579 replied 11 months ago.

E3 Error: Machine control is attempting to drive the motor but is not seeing any tach response. Visual check shows motor is not moving. (Locked, Hall Sensor fault). The hall sensor is a circuit in the motor. the motor will need to be replaced.

Using the Star Rating Chart at the top of your page and rating me at least a 5 star is how I receive payment for helping you. Please if you do not understand my answer, don't hesitate to ask for more help. BONUSES appreciated.

Customer: replied 11 months ago.
the washing machine will run and cycle till what I think is the last spin cycle then the tub will rock back and forth but will not make a full turn. Thank You *****