How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Start dryer on normal. Time remaining light blinks and

Customer Question

Start dryer on normal. Time remaining light blinks and stops. Hasn't done thus before
JA: What's the make and model of your dryer? And can you guesstimate how old it is?
Customer: Had one month. Model wed8740dw1
JA: Do you plan on doing the work yourself?
Customer: Depends on what's wrong. So new and worked fine 2 days ago
JA: Anything else we should know to help you best?
Customer: Just telle,why it is,doing this. Not in troubleshooting in brochure
Submitted: 10 months ago.
Category: Appliance
Expert:  Joel Swenson replied 10 months ago.

Hello, I'm Joel and will be glad to help you today.

Following the directions below put the unit into diagnostic mode and see if there is a stored error code and if so let me know what it is, thanks. Once diagnostics is activated it will either flash 888 if there is no stored error code or if there is an error code it will flash the code instead of 888. Let me know what you get, thanks.

click here for instructions