How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Webb-Guy Your Own Question
Webb-Guy
Webb-Guy, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1833
Experience:  maitenance tech at casto
95800582
Type Your Appliance Question Here...
Webb-Guy is online now
A new question is answered every 9 seconds

MY WASHER DOES NOT START IT JUST KEEP BEEPING ITS A AMANA

Customer Question

HI MY NAME IS***** WASHER DOES NOT START IT JUST KEEP BEEPING ITS A AMANA 7300 MODLE NUMBER IS *****
JA: Can you guesstimate how old your Amana is? And just to clarify, what's the exact model?
Customer: I BOUGHT IT IN JUNE 20 13
JA: Do you plan on doing the work yourself?
Customer: IF ITS POSSIBLE
JA: Anything else we should know to help you best?
Customer: THATS IT IT WONT START
Submitted: 11 months ago.
Category: Appliance
Expert:  Webb-Guy replied 11 months ago.

Hello and welcome to just answer my name is ***** ***** I will be the one who will try to assist you. Give me just a moment to pull up information for you.

Expert:  Webb-Guy replied 11 months ago.

The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the washer door is not latched shut, the door switch will prevent the washer from operating. If the door lock is defective, the washer will not spin or start. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it. To determine if the door lock has failed electrically, consult your washer’s wiring diagram and use a multimeter to test each of the door lock switches for continuity.

http://www.repairclinic.com/PartDetail/Amana-Washing-Machine-Door-Lock/WPW10253483/1515091?modelNumber=NFW7300WW00&fromRepairHelp=True&ss=a11b1d899195

First ensure that power is getting to the electrical outlet. If the electrical outlet is receiving power, but the washer won’t start, the power cord might be defective. However, this is very rare. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.

http://www.repairclinic.com/PartDetail/Amana-Washing-Machine-Power-Cord/WPW10205499/4442351?modelNumber=NFW7300WW00&fromRepairHelp=True&ss=a11b1d899195

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.

http://www.repairclinic.com/PartDetail/Amana-Washing-Machine-User-Control-And-Display-Board/WPW10212764/4442524?modelNumber=NFW7300WW00&fromRepairHelp=True&ss=a11b1d899195

Expert:  Webb-Guy replied 11 months ago.

I was wondering if you had a moment to look over the information I had provided you?

Expert:  Webb-Guy replied 11 months ago.

http://www.repairclinic.com/PartDetail/Amana-Washing-Machine-User-Control-And-Display-Board/WPW10212764/4442524?modelNumber=NFW7300WW00&fromRepairHelp=True&ss=a11b1d899195

Here is the part you are looking for. I noticed you had a new question open so I figured I would follow up here on the original with you.

If you are satisfied with this information all I ask is you rate with 5 stars at the top. Rating does not stop you from getting back to me in the event you need me.