How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 80272
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I need to remove/replace ice maker in a MSD2572VEW01, Maytag

Customer Question

I need to remove/replace ice maker in a MSD2572VEW01
JA: What's the make and model? And can you guesstimate how old it is?
Customer: Maytag MSD25572VEW01 , 2010
JA: Do you plan on doing the work yourself?
Customer: Yup
JA: Anything else we should know to help you best?
Customer: Just need to know where the screws are
Submitted: 12 months ago.
Category: Appliance
Expert:  Tyler Z. replied 12 months ago.

Good morning. My name is ***** ***** I'll be helping you with your refrigerator today. There are just 2 screws going in above the icemaker into the left side wall. Sometimes there is a 3rd screw coming in from below the icemaker near the front going into the left wall as well. I drew red arrows on your icemaker where you would see the screws and attached a picture of your icemaker below.

We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today and reply back here letting me know with a rating of 1-5 stars (5 being the best). If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.

Expert:  Tyler Z. replied 12 months ago.

Hello again. I'm just following up because I haven't heard back from you and I see this question is still open and unrated. Is there anything else I can help you with?