How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14881
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

You have helped me before. I have a GE free standing under

Customer Question

Kelly, you have helped me before. I have a GE free standing under the counter ice maker. Here I the model number and serial number:
ZDIS150WSSSP Serial Number FR125217 Manufactured 03/08
I think that I need a new recirculating pump. I have run the diagnostics and all three lights do not come on when I get to #5 - only the ON light comes on. The machine does not recirculate water in either the freeze mode, or the clean mode. Can I order a new recirculation pump from you? Will it come with instructions on how to install?
Bob Glowacki *****
Granbury, Texas 76048
Submitted: 1 year ago.
Category: Appliance
Expert:  John replied 1 year ago.

Welcome to JustAnswer. I'm John. The circulation pump part number is(###) ###-#### and its price is $113.99. You can buy it at Replacement help, if you need it, is available at the website.

Thank you for choosing JustAnswer.

Expert:  Appliance Guru replied 1 year ago.

Hello and thanks for using this service! If you are a JA Member I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know your skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our JA members.


Bob, you need to first check if the pump is powered during diagnostic mode. If it is then replace the pump here are two links so you can see how to remove it


Also here is a link to the pump for you


All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am paid anything through the site and that will also get you a DIRECT LINK emailed to you to get back to me! are greatly appreciated so thank you very much for using this service. If you have any other questions just post back to me here anytime!