How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14604
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

I have bosch washing machine model wfvc 6450uc19. When you

Customer Question

I have bosch washing machine model wfvc 6450uc19. When you turn dial to select cycle nothing shows on time display. After an hour it will appear and I can wash
JA: Can you guesstimate how old your Bosch is? And just to clarify, what's the exact model?
Customer: 5 years wfvc 6450 UC/19
JA: Do you plan on doing the work yourself?
Customer: If it's no too big a job
JA: Anything else we should know to help you best?
Customer: Has been getting progressively worse last few weeks
Submitted: 11 months ago.
Category: Appliance
Expert:  Appliance Guru replied 11 months ago.

Hello and thanks for using this service! If you are a subscription customer I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. I just picked up your question now. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know whether you are male/female, age or skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our Subscription Customers!


To fix that issue you need to replace PART #106 at this link...CLICK HERE, you need to remove the top of the unit then the screws to get the control console to lift out and you can then change out the control board. It is not that bad of a job to do if you are handy and have some tools. You will need some Torx bits though. T-15 and maybe a T-10

All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am paid anything through the site and that will also get you a DIRECT LINK emailed to you to get back to me! are greatly appreciated so thank you very much for using this service. If you have any other questions just post back to me here anytime!