How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

The ON button will not start the refer. No LED readout.

Customer Question

The ON button will not start the refer. No LED readout. Outside access behind refer
has red light flashing from small PC board.
What can I do to start this 1200LRIM unit?
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Guru replied 1 year ago.

Hello and thanks for using this service, if you have been waiting do not worry or get upset. I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. I just picked up your question now. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly I am not paid anything until you rate my service good using the STAR RATING LINK at the top of your page, the money is paid to the site not me directly.


Check the fuse on the power control board see if that is good and let me know.

Customer: replied 1 year ago.
Both 5 amp fuses are good
Customer: replied 1 year ago.
Are we still connected?
Customer: replied 1 year ago.
I will look for an e-mail @ 1PM
Expert:  Appliance Guru replied 1 year ago.

I have no idea what happened your messages just came through. If both fuses are good but you have no read out try the board reset, have you tried that yet?

Customer: replied 1 year ago.
I have opted 'out' of this service.
But I will quickly tell you that the problem was a recall correction that failed.