How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve G. Your Own Question
Steve G.
Steve G., Handyman
Category: Appliance
Satisfied Customers: 17987
Experience:  Very handy with appliance troubleshooting and repairs.
329447
Type Your Appliance Question Here...
Steve G. is online now
A new question is answered every 9 seconds

Schlage Keypad deadbolt reprogram instructions?

Customer Question

Schlage Keypad deadbolt reprogram instructions?
Submitted: 1 year ago.
Category: Appliance
Customer: replied 1 year ago.
How do I reprogram my Schlage after I change the battery?
Expert:  Steve G. replied 1 year ago.

Hello there and welcome to Just Answer. My name is ***** ***** I will be assisting you today. I am an engineer with over 30 years of electrical and electronic training, repair and installation experience. I will try and answer your question accurately and precisely so that we can get you on your way.

I need to gather some more information from you in order to help.

Are you asking to change the 6 digit programming code or the actual 4 digit code to lock and unlock the deadbolt?

Let me know so that we can continue.

Steve

Customer: replied 1 year ago.
I've been using 4 digits to lock/unlock.
Expert:  Steve G. replied 1 year ago.

Ok, so you want to change the 4 digit code?

To do this:

1. Enter the 6 digit programming code.
2. Wait for 3 lights and 3 beeps

3.Press 1

4. Wait for 3 lights and 3 beeps

5. Enter a new 4 digit code

6. Wait for 3 lights and 3 beeps

7. Enter the new 4 digit code again

8. Wait for 1 light and 1 long beep.

To delete a previous code:

1. Enter the 6 digit programming code.
2. Wait for 3 lights and 3 beeps

3.Press 2

4. Wait for 3 lights and 3 beeps

5. Enterthe old 4 digit code

6. Wait for 3 lights and 3 beeps

7. Enter the old 4 digit code again

8. Wait for 1 light and 1 long beep.

That's it!!

Let me know if you need more help.

Steve

Customer: replied 1 year ago.
I do not have the 6 digit programming code.
Expert:  Steve G. replied 1 year ago.

It would have been on a label that came with the lock.

There is no master code. At some point you must have programmed the lock. DO you remember seeing that programming code?

Customer: replied 1 year ago.
I do not remember it nor have it.
Expert:  Steve G. replied 1 year ago.
Does the lock have a key slot and do you have the key?
Customer: replied 1 year ago.
It does and I do have the key. Thanks
Expert:  Steve G. replied 1 year ago.

Hi, good morning. I am sorry but my laptop battery gave up last evening.

Ok, if you have the key, here are instructions on how to reset everything.

CLICK HERE and go to "Key Override on Pg 7

If you have any questions, please let me know.

Steve

Expert:  Steve G. replied 1 year ago.

Hi there. I sent you a message on 7/21. Did you receive it? It is shown above.

Let me know if you need further help and please do not forget to rate my answers.

Steve