Need Appliance Repair Help? Ask a Technician for Answers ASAP
Good morning! My name is ***** ***** I'll be helping you with your range today. F1 on this oven means that there is an internal short in the low voltage heating circuit on your unit. This is either a bad oven sensor or a bad display relay control board. You can't test the board but you can test the sensor. Open the door and remove the 3-4" long thin metal rod attached to the back wall. There are 2 screws holding the sensor on that you can remove and then pull the sensor forward until you can disconnect it. With a multimeter, check the resistance of the sensor at room temperature and it should be about 1080 ohms. If it's not, replace the sensor, otherwise you need to replace your display board.
We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today and reply back here letting me know with a rating of 1-5 stars (5 being the best). If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?