How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79458
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a new Maytag wasger which has been working fine until

Customer Question

I have a new Maytag wasger which has been working fine until today. It will not cycle out of the rinse cycle, just keeps rinsing over and over. I have limited vision issues but I think the model number is *****
Thank you
Sue Sparks
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.
If an error code isn't occurring and the washer doesn't stop just flashing the lid lock light constantly (indicating there is an error), then your main control board is just acting up and would need to be replaced. Try to unplug the washer for 5 minutes to see if the electronics will reset. If that doesn't work, either call warranty if it's been less than a year since the time you purchased it, or you can order and replace the board yourself if it's out of warranty. We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.
Expert:  Tyler Z. replied 1 year ago.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?