How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Same dw still will not advance after control and owi

Customer Question

same dw still will not advance after control and owi replaced will advance through diaignosis format.
heater draws 7 amps but stops heating about 5min into cycle cked highlimit and heater
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.
I'm not sure what else can possibly cause this issue other than the circulation pump not spraying the water or the dishwasher not filling up with water so I would check those things since that can stop the water from heating or the OWI sensor from seeing clear water. I'll opt out and someone else might have an idea.
Customer: replied 1 year ago.
Water is filling and pump is circulating
Expert:  Appliance Guru replied 1 year ago.
Hello and thanks for using this service, if you have been waiting do not worry or get upset. I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. I just picked up your question now. Do you have the model number off the unit?