How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Have a Bosch wfvc3300uc front load washer. Replaced the door

Customer Question

Have a Bosch wfvc3300uc front load washer. Replaced the door gasket and washer ran fine for a short while. Now it is making loud noises and vibrating and walking away from the wall on all settings except quick full and gentle. Any suggestions what could be wrong ?
Submitted: 1 year ago.
Category: Appliance
Expert:  bonzaco replied 1 year ago.
What made you change the door seal in the first place?
Customer: replied 1 year ago.
Could not get it clean or elimate the musty smell
Expert:  bonzaco replied 1 year ago.
OK so is the seal catching anywhere or has it spun around on the drum?
Customer: replied 1 year ago.
No drum spins freely by hand and I don't see anywhere where the gasket is touching or rubbing against the drum
Expert:  bonzaco replied 1 year ago.
OK I would check the top springs, the concrete block for tightness and the shockabsorbers to make sure they havent become loose firstly.