How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9916
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

How to remove the feet assembly from the pedestal and reattach

Customer Question

how to remove the feet assembly from the pedestal and reattach to the dryer
Submitted: 1 year ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 year ago.
Hello from Just Answer and the Appliance Catigory My name is Woody. I will be glad to assist you today. I have been servicing ALL Major Brands of Appliances for 36 Years, I own my own Appliance repair Company And I teach appliance repair at a local Community College. I have over 100,000 plus in home repairs and over 80,000 internet repairs under my belt. You will be paying me for my ANSWER to your Appliance Question,, Not for the repair of your appliance hence the name of this site Just Answer. I will do my best to take the information that you provide to me and make a Diagnosis for you to be able to repair your own Appliance. Can I please have the Full model number of the dryer unit to better assist you ? The pedestal feet are different then the dryer feet.
Customer: replied 1 year ago.
where is that
Expert:  Whrlp Master Tech replied 1 year ago.
open the dryer door it is on the dryer face frame.
Customer: replied 1 year ago.
so i have to buy dryer feet from sears along with the threaded assembly that attaches into the dryer bottom
Expert:  Whrlp Master Tech replied 1 year ago.
No! the threaded nut is welded to the inside of the dryer base.
Expert:  Whrlp Master Tech replied 1 year ago.
you will need to order four of these.http://www.repairclinic.com/PartDetail/Leveling-Leg/49621/1373044?ss=-x67657739323030&mr=1?rcaid=1000070 If you have any questions just reply back.
Customer: replied 1 year ago.
the model number is *****
Customer: replied 1 year ago.
there are no threads welded to the bottom of the dryer
Customer: replied 1 year ago.
just 4 holes
Customer: replied 1 year ago.
are you still there
Expert:  Whrlp Master Tech replied 1 year ago.
yes the thread on your model are pressed into the base plate it is just a hole and a thread lip that the legs thread into
Expert:  Whrlp Master Tech replied 1 year ago.
the link for the part has a video showing how the legs are installed!