Need Appliance Repair Help? Ask a Technician for Answers ASAP
If the washer won't stop spinning on it's own, it means that your main motor control board isn't working properly. Try to unplug the washer for 5 minutes to see if the electronics will reset. If not then you need to order and replace the motor/power control board because this is is actually the board the controls the washer and tells it when to advance. The front display board is just a slave board and wouldn't cause this issue so below is a link to the part you'd need to order for your model.
CLICK HERE for control board
We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?