How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Just replaced the bearings in my Maytag Neptune MAH7500 and

Customer Question

HI Dave, My name is***** replaced the bearings in my Maytag Neptune MAH7500 and now it won't finish its final spin cycle
JA: Thanks. Can you give me any more details about your issue?
Customer: Screen one time said out of balance load. We removed those clothes, wet, and put them in the dryer. Second load at the 5 minute remaining time washer starts to spin up then stops. Waits a bit tries again, same thing spools up, not to speed and stops
JA: OK got it. Last thing — Appliance Technicians generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Appliance
Expert:  Dave replied 1 year ago.

What's the complete model number and the first 2 digits of the serial number?