Ok so at this point you have a repair issue, either you have not power to the dishwasher, meaning the breaker is bad, if you have verified power to the dishwasher then there are several components that could have failed,
1. The on/off switch is bad not supplying power to the control board
2. The door switch is bad not supplying voltages to the control board
3. The control board is defective.
If you have an ohm meter and know how to use it I can give the instructions to test the components to find out which needs replacing, in the meantime:
PLEASE take into consideration we are on the honor system for our time, I Kindly ask you to rate my service BEFORE YOU LEAVE TODAY by clicking 3 or better on the STAR RATING SYSTEM at the top of your page or wherever the 5 star rating system is located on your page (sometimes it's hard to find but it's there).
Also be aware that this rating is for the quality of my response, not a rating for the overall experience you have had on this site.
Rating me will not in any way affect the amount you agreed to pay for the question. This will also allow you to get directly back to me for FREE follow up questions.
Before leaving a negative rating please discuss it with me first so I can have a chance to remedy the issue. Thank You!
TIPS are not expected but are GREATLY APPRECIATED!