How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22585
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Miele G892 SC Touchtronic Turbo thermic dishwasher.

Customer Question

I have a Miele G892 SC Touchtronic Turbo thermic dishwasher. I got it from a clients house and have installed and plumbed it. I scored it outside for a couple of days in freezing weather but it has been inside for 2 days now. The Instake/ Drain display is blinking red and the dishwasher won't run. I checked the filters in the water line and they are clear. I cleaned out the drain inside the dishwasher as well. Any ideas? George
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! There are three main reasons that the Intake/Drain light comes on.

  • Unit will not fill
  • Water is not draining
  • Heater pressure switch sees too little water to close

When you start the cycle, does the inlet valve hum or buzz? Is there water that has not drained?