How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 10392
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

I have a whirlpool WOD51EC0AS01. RAN CLEANING CYCLE. OVEN

Customer Question

I have a whirlpool WOD51EC0AS01. RAN CLEANING CYCLE. OVEN DEAD,
both thermo fuses are fine.
Submitted: 1 year ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 year ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.

Which thermal fuses have you tested this model has three one for each oven. on the L2 red wires

And one on the L1 black leads that power the control board

Customer: replied 1 year ago.
I have only checked two in the back for each oven.
Customer: replied 1 year ago.
I did not know about the third one. Where would that be?
Expert:  Whrlp Master Tech replied 1 year ago.

ok neither one of them will kill the power to the control board .

I recommend to test the one on the black leads on the P6 connector on the control board.

Here is a link to the part if it is bad.

http://www.repairclinic.com/PartDetail/Thermal-Fuse/W10545291/3021646?rcaid=1000070

If the oven control /clock is dead it will be what is faulty.
If you have any questions just reply back.

Customer: replied 1 year ago.
I'm having hard time removing in that fuse. Any ideas
Expert:  Whrlp Master Tech replied 1 year ago.

What do you mean ? the black wires just plug on to the fuse on each side.

Customer: replied 1 year ago.
I got the plugs unplugged, but the zip ties dad going to be holes won't come out
Expert:  Whrlp Master Tech replied 1 year ago.

just test the metal terminal on each end the ties hold the rubber insulation on over the top of the life connections on either end of the fuse.

Customer: replied 1 year ago.
Got it, thanks
Expert:  Whrlp Master Tech replied 1 year ago.

no problem, glad to assist you anytime.

If you need me again for any other issues you can request me Whrlp Master Tech.

And Even after you rate me Today if you have a question just reply back to me,
I will still assist you, no extra charges .
But rating me is the ONLY way I get paid for my time.

Expert:  Whrlp Master Tech replied 1 year ago.

Thank you in advance and have a Very Merry Christmas!

Expert:  Whrlp Master Tech replied 1 year ago.

I see you have not rated me as of yet!
Even after you rate me if you have a question just reply back to me,
I will still assist you ,but rating me is the ONLY way I get paid for my time