How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 10156
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

5 yr old double wall oven, after breaker 1st turned on, runs

Customer Question

5 yr old double wall oven, after breaker 1st turned on, runs for 36 seconds then trips off. Error message E1 F2 always comes up. Replaced the touch panel, rebuilt circuit board sent to Core Centric Chicago. All other attempts to operate keep bringing up the same error message. Had service man here who told me circuit board had to be rebuilt because new no longer available. Anything else I can try? (checked all internal connections above top oven.)
Submitted: 1 year ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 year ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.

The service person is correct the error code is a control panel keypad issue.

And if you have replaced it and had the control rebuilt,and your still getting the same error
I too would recommend to return the control to have them go over it once again.

As long as the membrane ribbon is securely attached to the control board very unlikely it would be the console panel /touch pad.

If you have any questions just reply back

Expert:  Whrlp Master Tech replied 1 year ago.

I see you have not rated me as of yet!
Even after you rate me if you have a question just reply back to me,
I will still assist you ,but rating me is the ONLY way I get paid for my time