How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22300
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Miele w1918 washer. Placed load on extra spin, mid

Customer Question

I have a Miele w1918 washer. Placed load on extra spin, mid way stopped spinning. Felt like it was trying to spin but a very low speed. Any reset function
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The attaches sheet will instruct you on initiating a service cycle. Once initiated, it will reset the control. Allow about 1 minute after it is programmed and then unplug the machine for a few minutes. Any change in the behavior at all?