How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81155
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

When removing the water dispenser on a side by side, what

Customer Question

When removing the water dispenser on a side by side, what causes the cradle assembly to be stuck even after 4 screws removed? The lower right corner appears to be glued in place.
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

You are exactly right. Sometimes there is a bit of glue in the lower corner of the cradle holding it in place. You just need to pull hard and pry a bit until it breaks free.