How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22271
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a GE range/stove. Oven controller #WB27T1074 died and

Customer Question

I have a GE range/stove. Oven controller #WB27T1074 died and replacement #WB00X2195 was acquired. Old wiring had a pin plug (P103) with a black/White stripe and black wires. There is no obvious equivalent plug on new controller. What to do?
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The older GE oven controls almost always need to be rewired when they are replaced to accommodate new updated controls. The part numbers you posted are not good numbers. Can you check those numbers, please?

May I please have your model number so I am able to provide you with accurate, model specific information?

Customer: replied 1 year ago.
Model number JSP40A0W3AA
Old oven control number WB27T10174
New WB00X21975
These numbers show up on internet. There are many other numbers on the devices
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The control you need is below. Wiring instructions are attached.

CLICK HERE