How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AppTech8579 Your Own Question
AppTech8579, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1699
Experience:  worked on appliances for around 15 years
Type Your Appliance Question Here...
AppTech8579 is online now
A new question is answered every 9 seconds

How do I attach a neBillw drum belt on my Bosch WTA 4410 US

Customer Question

How do I attach a neBillw drum belt on my Bosch WTA 4410 US dryer. I've already gotten the front off and have full access to the drum. Looks like there are only 4 screws (2 on each side) holding the plastic cowling on and once I take them off I should be able to loop the belt around the drum.
My biggest problem though is that I cannot figure out how to the pulleys as I see no way of removing the pulleys from the sheet metal arm they are attached to.
Thanks for your help.
Submitted: 1 year ago.
Category: Appliance
Expert:  AppTech8579 replied 1 year ago.

Watch this video to help you.

Using the Star Rating Chart at the top of your page and rating me at least a 3 star is how I receive credit for helping you. Please if you do not understand my answer, don't hesitate to ask for more help. Thank you for using Just Answer.

Customer: replied 1 year ago.
I had already seen this video. It is not even close to the Bosch dryer I have and is not worth paying anything for. Please cancel the whole fee.
Expert:  AppTech8579 replied 1 year ago.

After removing the top and front did you remove the front support?

Expert:  AppTech8579 replied 1 year ago.

Also you need to remove the left side panel.