How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joel Swenson Your Own Question
Joel Swenson
Joel Swenson,
Category: Appliance
Satisfied Customers: 3116
Experience:  Owner at Scott's Appliance Repair
89799402
Type Your Appliance Question Here...
Joel Swenson is online now
A new question is answered every 9 seconds

MY MAYTAG -ADVANCE COOKING SYSTEM DOESNT WORK IT SHOWS F9

Customer Question

MY MAYTAG -ADVANCE COOKING SYSTEM DOESNT WORK IT SHOWS F9 THE RANGE TOPS WORK BUT NOT THE OVEN
I REPLACED THE IGNITER BUT STILL DOESNT WORK
WHATS THE PROBLEM?
Submitted: 1 year ago.
Category: Appliance
Expert:  Joel Swenson replied 1 year ago.

Hello, I'm Joel thank you for your interest in our service. If

you have been waiting a while I apologize we try to help as

many customers as possible in a timely manner. I am now

available to help you with your question.

F9 error code is a problem with the door lock safety circuit.
You can try unplugging the oven or turning off the breaker this may release the lock which is controlled by a micro switch. f this does not work with the power off use shine a light through the slot where the lock is in the oven, not the door, you may be able to use something thin to move the lock to the release position. check the lever and make sure its not bent or croooked as this can cause the error as well.

If the door lock circuit is operating properly you will need to replace the control board/clock.

You did not leave your model number if you would like to send it to me I would be glad to find you the part and part numbers in case you need them.

We are on the honor system here. Please remember to rate my

service by selecting a star at the top of the screen before

you leave today. If you need anything else, just let me know.

You can continue asking follow-up questions at no additional

charge after rating my service if you still need assistance.

Customer: replied 1 year ago.
I already did that I turned the electricity off I removed the door but the error still on
Expert:  Joel Swenson replied 1 year ago.

Then you have a control board problem and it will need to be replaced.

Expert:  Joel Swenson replied 1 year ago.

if you give me the model off the stove I will be glad to locate you the part number and part.

Expert:  Joel Swenson replied 1 year ago.

I see this question is still open if there was nothing more I can do for you please rate my

service using the star rating system so I can put this on my done list thanks!