Need Appliance Repair Help? Ask a Technician for Answers ASAP
does the washer fill with water and drain the water?
Most likely if the washer is filling and you have replaced the lid lock, there are two possibilities
1. the drain pump is running but not draining fast enough due to a bad impeller inside the pump motor.
2. The mode shifter/actuator is bad Part #: W10006355. This shifts the transmission from wash to spin and vice versa if this has failed the washer will not spin or wash in most cases, unless its stuck in one mode or the other in which case the washer will fail during cycle. This part is located under bottom of the washer you will need to remove the plastic belt cover in order to locate it, it will be brown with 2 green phillips screws attaching it to the washer and there will be a wire harness plugged into it.
We are on the honor system here. Please remember to rate my
service by selecting a star at the top of the screen before
you leave today. If you need anything else, just let me know.
You can continue asking follow-up questions at no additional
charge after rating my service if you still need assistance.