How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79499
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Tyler, I got the part in range and trying to install it. The

Customer Question

Hi Tyler, I got the part in for the range and trying to install it. The current panel on the range won't come off. Any suggestions on best way to remove it? It's a Jenn air
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

Hmm without being there I couldn't say for certain, but usually all you need to do is open the oven door and remove the screws coming in from the bottom of the control panel. Then pull the range out a few inches and sometimes there are a couple screws coming in from the right and left side just behind the control panel that you remove and the panel pulls off.